Carboline Carbocoat 115

  • Rapid cure and fast-drying
  • VOC compliant for most areas
  • Good for filling properties on rough and pitted steel
  • Flat finish

Carboline Carbocoat 115 is a fast-drying steel primer that provides corrosion protection on structural steel. Well suited for fabrication shops that need fast cure to dry and handle times. May be top-coated with conventional alkyds or acrylics for colour, aesthetics or additional protection.

When applying a topcoat, Carboline Carbocoat 115 may be coated with Acrylics or Alkyds depending on exposure and need.

Features & Benefits

  • Rapid cure and fast-drying
  • VOC compliant for most areas
  • Good for filling properties on rough and pitted steel
  • Flat finish

Preparation

General Surfaces: must be clean and dry. Employ adequate methods to remove dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating.

Steel Surfaces: SSPC-SP6 with a 1.0-2.0 mil (25-50 microns) surface profile for maximum protection. SSPC-SP2 or SP3 as minimum requirement.

Mixing

Power mix until uniform in consistency. May be thinned up to 6 oz/gal (5%) with Thinner 10. Use of thinners other than those supplied or recommended by Carboline may adversely affect product performance and void product warranty, whether expressed or implied.

Application Conditions

This product simply requires the substrate temperature to be above the dew point. Condensation due to substrate temperatures below the dew point can cause flash rusting on prepared steel and interfere with proper adhesion to the substrate. Special application techniques may be required above or below normal application conditions.

Please see the Product Data Sheet for more details.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Reviews

There are no reviews yet.

Be the first to review “Carboline Carbocoat 115”

0333.738.998Báo giá, phản ánh, khiếu nại