A heavy-duty primer formulated to provide long term protection of structural steel. It provides excellent adhesion and can be welded through to yield sound welds.
Carboline Carbocoat 150 Universal Primer is a single-component phenolic modified alkyd, with a flat finish available in red or grey colour shades.
Features & Benefits
- Good for extended exposure demands
- Ability to be welded through
- Heavy-metal free
- VOC compliant for most areas
- Accepts wide range of topcoats
Preparation & Application
Surfaces must be clean and dry. Employ adequate methods to remove dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating.
SSPC-SP6 with a 1.0-2.0 mil (25-50 micron) surface profile for maximum protection. SSPC-SP2 or SP3 as minimum requirement.
Mixing & Thinning
Power mix until uniform in consistency
Normally not required but may thin as follows: Spray, brush or roller may be thinned up to 6 oz/gal (5%) with Thinner 10. Use of thinners other than those supplied or recommended by Carboline may adversely affect product performance and void product warranty, whether expressed or implied.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.